Creality K1,Filament Storage, Fire Safety and MORE!

This Episodes Listener Questions:

From Hurz:
How does Guy feel about wood filled filament?

From Derek:
Hello from Tasmania! Really enjoying the 3D printing podcast after consuming most of the woodshop life podcasts. I also started in woodworking and have branched out to 3D printing after getting a second hand Creality CR6-SE about a year ago.
My question: can you talk about your preferred method for storing filament and keeping it dry. Also is there a shelf life for filaments or if stored properly could they be used indefinitely?
Second question: pros and cons of having an enclosure. I print with PETG or PLA+. I mainly make jigs and accessories for the workshop (eg TIG tungsten grinder, right angle sanding jig for festool sander, drill bit holders etc). Is there any advantage for me to make an acrylic enclosure for my printer? Would i get any improvements in terms of print quality? My house is climate controlled and has very stable temp and humidity levels.

Possible question 3:
Have you ever had a 3D printer malfunction or catch fire (worst case scenario) with extended or overnight use. Just wondering how well these machines might stand up to a longer period of use. I sometimes might have to leave the house when there’s a lengthy print happening but sometimes worry about what could happen when left unattended. Given there are electrics plus heat in combination, any tips on safety and fire risk?
Thanks!

From Brent:
Hello love the show I’m currently at a loss I have been 3d printing for a year now and have had several solid prints on ender 5 pro. We ended up having a large storm and it still worked after words but with issues I’ve fixed almost all of them by upgrading and replacing certain parts but my current issue is that the walls of my prints are separated not layer lines but looking down at the walls they are separated when they where one before and I have asked many 3d printing groups and they only send me to same websites that haven’t been able to help any ideas I’m ready to burn this printer to the ground thank you sorry for the length of this message

IDEX Printers, Prusa MK4, Buying A Second Printer and MUCH MORE!

Here are this weeks listener questions:

Hurz

Hello Guy(s),

how is it that Prusaslicer is so awesome in regard to multimaterial painting and so bad at handling IDEX in general? When using an oozeshield the temperature management is poor i.e. the next extruder reheat is not predicted so it takes a lot of time because isn’t done while the other head is still printing. Also the retraction settings for a tool change are broken for 2 years now, hell back then I didn’t even have a printer. Cura on the other hand handles the machine very nice but has no painting option.

What Slicer does JJ prefer for IDEX?

Jon

Hey Guy, JJ, and Nathan,

I read the other day, “He who has 2 3D printers, has 1 operational 3D printer”. I am looking at getting a second printer, I was impressed with y’all’s (sorry for “y’all’s”  I am from Missouri) videos on the Ender 3 S1/S1 Pro, Ender 5 S1, and Artillery Sidewinder X2. I will be using it to print replacement parts for an Ender 3 Pro I intend to mod. Any opinions on what to buy? I want the ability to print fast as well as print with high quality via slow speeds. I am gravitating towards the Ender 5 S1. Though Artillery is coming out with a CoreXY in the near future that could be cool too.

Sorry if this sort of question are out of bounds. Loving the Podcast.